FEATURES:

– Extreme isolation between outputs.

- Extendable, modular box.

- Output test led vumeter.

- Ideal for Press conferences with several languages.

PRESS ACTIVE SPLITTER: 1IN-96OUT
FEATURES:
- Extreme isolation between outputs.
- Extendable, modular box.
- Input test led vumeter.
- Output test led vumeter.
- Desired output signal adjustable by potentiometer.
- Ideal for press conferences with up to 96 press points.

DIGI RACK BOX

 
It is a Rack box destined for the audio signal patching from the stage and his later sending to the digital converters. These converters use to be very expensive and its patching is preferable through a box like this one, which offers hardiness and consequently permanence of the digital rack. The back patching towards the converters follows the Tidy series that offers a very organized and careful cabling.

As always Pínanson offers different configurations and possibilities for the DIGI RACK BOX: Number of inputs in XLR, Inputs from remote boxes by Multiconector, Patching of signals from remote boxes, Outputs to secondary consoles (isolated) through Multiconector or XLR.

DIMMERS’s LAST PATCH

It is a Rack Box destined for the Dimmers’s patching and his later sending to lamps.

Configurable with the most popular connectors for Dimmers Patching as the Powercon and the Wieland. It is very ergonomic since it leaves sufficient space for the connection and disconnection when patching. It is a modular box that therefore can be extended in channels. The insertion from Dimmers and to lamps is done through terminal blocks which insertion is very easy and trustworthy in addition the labeling system is very clear. As always Pínanson offers different configurations and possibilities for this Patch: Number of channels, Direct Input instead of through terminal blocks and certainly the format that can be for Rack or into Wall Rack.

ADAPTERS FOR OPTICAL FIBER

They are very manageable boxes into the Slim and MF series. They adapt connectors from Neutrik OpticalCon’s to optical LC-SC-FC-MTRJ connectors. With this so economic form we will be able to have an adjustment from professional connector to more standardized connectors.

SPLITTERS MSMC SERIES

They appear in format of Rackable box. The Splitters MSMC are press Splitters that follows the philosophy and isolation quality between outputs that offers Splitters’s range SMC, nevertheless these are designed to cover much more multitudinous press conferences.

A variant, offers the possibility of having 8 different inputs, for example for different languages, each of them distributed to 12 press points. Every group can be output tested with a led test vumeter.

Another possibility is to have a unique entry, distributed in up to 96 press points. Every group of 12 outputs is adjustable with potenciómeter. Every group can be a output and input tested with a led vumeter.

NEW FORMATS FOR THE SMC PRESS SPLITTERS

In the beginning there were launched in BriefCase fly case format: the most standardized format in the market. Nevertheless for other fixed emplacements, other formats are needed. This is why Pínanson has launched the same Splitters in format of rackable box and wall rack for fixed facilities. Nevertheless Pinanson is conscious that other applications can be possible and is open for other designs for measure following the specifications of every client.

RANGE OF BANTAM BCT PANELS EXTENSION

Already known Bantam BCT Panels allow a long and clean installation thanks to their corrosion and powder resistant connectors. The DIP or by soldering normalization systems allows a saving of time from 10 to 1. They are compatible for analogue and digital signals. Now the possibilities are extended for the Bantam BCT Panels.

1. Prepared for installation by soldering.
   1. Tie Lines Configuration from Factory (possibility of all normalizations by soldering)
   2. Normal configuration from Factory (possibility of half-normalization by soldering)
   3. Normal configuration from Factory (possibility of all normalizations by Switch DIP type)
   4. Prepared for installation with sub-d-25 connectors.
      1. Normal configuration from Factory
      2. Normal configuration from Factory (possibility of all normalizations by Switch DIP type)
      3. Prepared for installation by Terminal Block.
         1. Configuration Tie Lines from Factory (possibility of all normalizations by soldering)
         2. Normal configuration from Factory (possibility of half-normalization by soldering)
         3. Normal configuration from Factory (possibility of all normalizations by Switch DIP type

PINANSON SMC PRESS ACTIVE SPLITTER

In a room where a signal must be distributed to the press, a sound technician processes the input from a console. It is needed that all the press, have the same signal trouble free, non of them must interfere in the others, in a moment the output signal must be turned up for a specific press group and the signal level of each press group must be tested: our SMC splitter is the better choice.

COMPARATION AND TEST

The Pinanson SMC splitter offers:

• Input test led vumeter, (permanent).
• Output test led vumeter, (pressing switch). This test can be done also with headphones.
• Desired output signal adjustable by potentiometer.

SIGNAL AMPLIFICATION AND EXTREME ISOLATION

The Pinanson SMC splitter guaranties an extreme isolation in each of the output channels. This splitter has the possibility of amplifying the input signal and this way it can compensates the signal distribution. Each signal is galvanically isolated through high quality transformers in a way that no noise interferes among the outputs.

ALL FORMATS POSSIBLE:

Briefcase, On walls, In walls, Rack…

To find more Pinanson Splitters follow this link.

To find the whole range of Splitters, follow this link.