DIGI RACK BOX

 
It is a Rack box destined for the audio signal patching from the stage and his later sending to the digital converters. These converters use to be very expensive and its patching is preferable through a box like this one, which offers hardiness and consequently permanence of the digital rack. The back patching towards the converters follows the Tidy series that offers a very organized and careful cabling.

As always Pínanson offers different configurations and possibilities for the DIGI RACK BOX: Number of inputs in XLR, Inputs from remote boxes by Multiconector, Patching of signals from remote boxes, Outputs to secondary consoles (isolated) through Multiconector or XLR.

DIMMERS’s LAST PATCH

It is a Rack Box destined for the Dimmers’s patching and his later sending to lamps.

Configurable with the most popular connectors for Dimmers Patching as the Powercon and the Wieland. It is very ergonomic since it leaves sufficient space for the connection and disconnection when patching. It is a modular box that therefore can be extended in channels. The insertion from Dimmers and to lamps is done through terminal blocks which insertion is very easy and trustworthy in addition the labeling system is very clear. As always Pínanson offers different configurations and possibilities for this Patch: Number of channels, Direct Input instead of through terminal blocks and certainly the format that can be for Rack or into Wall Rack.

ADAPTERS FOR OPTICAL FIBER

They are very manageable boxes into the Slim and MF series. They adapt connectors from Neutrik OpticalCon’s to optical LC-SC-FC-MTRJ connectors. With this so economic form we will be able to have an adjustment from professional connector to more standardized connectors.

SPLITTERS MSMC SERIES

They appear in format of Rackable box. The Splitters MSMC are press Splitters that follows the philosophy and isolation quality between outputs that offers Splitters’s range SMC, nevertheless these are designed to cover much more multitudinous press conferences.

A variant, offers the possibility of having 8 different inputs, for example for different languages, each of them distributed to 12 press points. Every group can be output tested with a led test vumeter.

Another possibility is to have a unique entry, distributed in up to 96 press points. Every group of 12 outputs is adjustable with potenciómeter. Every group can be a output and input tested with a led vumeter.

NEW FORMATS FOR THE SMC PRESS SPLITTERS

In the beginning there were launched in BriefCase fly case format: the most standardized format in the market. Nevertheless for other fixed emplacements, other formats are needed. This is why Pínanson has launched the same Splitters in format of rackable box and wall rack for fixed facilities. Nevertheless Pinanson is conscious that other applications can be possible and is open for other designs for measure following the specifications of every client.

RANGE OF BANTAM BCT PANELS EXTENSION

Already known Bantam BCT Panels allow a long and clean installation thanks to their corrosion and powder resistant connectors. The DIP or by soldering normalization systems allows a saving of time from 10 to 1. They are compatible for analogue and digital signals. Now the possibilities are extended for the Bantam BCT Panels.

1. Prepared for installation by soldering.
   1. Tie Lines Configuration from Factory (possibility of all normalizations by soldering)
   2. Normal configuration from Factory (possibility of half-normalization by soldering)
   3. Normal configuration from Factory (possibility of all normalizations by Switch DIP type)
   4. Prepared for installation with sub-d-25 connectors.
      1. Normal configuration from Factory
      2. Normal configuration from Factory (possibility of all normalizations by Switch DIP type)
      3. Prepared for installation by Terminal Block.
         1. Configuration Tie Lines from Factory (possibility of all normalizations by soldering)
         2. Normal configuration from Factory (possibility of half-normalization by soldering)
         3. Normal configuration from Factory (possibility of all normalizations by Switch DIP type